| | |
MiniTrol
Percent Time
Timed Output Load
This timed control turns the
output load on and off and then repeats the cycle. Each position on the knob
from LO to HI represents a specific cycle time where the on time ranges from 6
to 100 percent. For example the LO setting represents a total cycle of
approximately 60 seconds with an on time of 4 seconds. This type of control can
be used to regulate the temperature of resistive loads. The pilot light on the
front will glow when the load is on. The unit comes with a 6’ attached power
cord.
Glas-Col Offers:
- Low profile, space-saving
designs
- All 115V units are CSA
certified
- Electrical: pilot light, fuse
protection, 3 wire load receptacle, and 3 wire line cord with molded plug
- Case constructed of anodized
aluminum with no mar rubber feet
- Size: 2 1/2"w x 4
1/4"d x 2"h (PL312 & 324)
- Size: 5"w x 4 1/4"d x
2"h (PL3122)
PL3122 MiniTwin handles two
separate circuits. A pilot light is connected across the output side of the
control, indicating power to load. With the desired temperature determined on
the initial run, a simple dial setting controls repeat operation.
|
Range
|
from 5-1/2 to100% of time
|
|
Accuracy:
|
N/A
|
|
Calibration:
|
N/A
|
|
Display:
|
Reference Knob Lo to Hi
|
|
Resolution:
|
N/A
|
|
Power Requirement:
|
120V, 60Hz
|
|
Control:
|
Percent Timer
|
|
Environment
|
0 to 149 oF / -18
to 65 oC; 0 to 90% RH, non-condensing
|
|
Load Ratings:
|
1440 watts resistive
|
|
Dimensions:
|
2"H x 2-1/2"W x
4-1/4"D
|
|
| |
|
